You should see something like "MME Audio Repeater".
#Virtual audio cable setup for dual speakers software Looks fairly easy from your instructions You can set it up in both playback/ record tabs depending upon your needs. In the first window of MME you opened, for the top dropdown select your Speakers. In the second window of MME you opened, for the top dropdown select Line 1. In the third window of MME, for the top dropdown select your microphone input. Now, your speakers and microphone outputs will go straight into Line 2.įor the next dropdown, select Line 1.Īfter all the dropdowns have been filled and selected, click "Start" on all three audio repeaters. So, you are essentially combining the two. Note: If you cannot find Line 1 and/or 2, go to your Audio Mixer and make sure these are enabled and that Line 2 is set as your default device under "Recording" so you may use it in games and override your actual microphone. Virtual Audio Cable (VAC) by Eugene Muzychenko is a licensed application that lets you build input and output links for your software’s sounds. At the bottom right there is a speaker icon - right-click on it and select Sound. If you are using foobar2000 to play music through the microphone, make sure you select the output as Line 2. This process is done through the application’s settings without the need to use any hardware.
#Virtual audio cable setup for dual speakers softwareĪ window will open with sound devices - among them there will be a newly.#Virtual audio cable setup for dual speakers install.
0 kommentar(er)
